FEFCO 0330 (330) – base and lid, slotted together with tabs
FEFCO 0330 consists of two parts: a base tray and a slightly larger lid tray that slides over it from above. Both parts are folded from flat blanks without glue – the walls are secured at the corners with tabs.
Quote for a custom FEFCO 0330
Give us the internal dimensions (L × W × H), the quantity and – if known – the board. We will reply by email with a quote.
Request a quote for FEFCO 0330Similar constructions: FEFCO 0301 · FEFCO 0425 · FEFCO 0300
What is FEFCO 0330 suited for?
For gift sets, documents, textiles and products that are opened repeatedly. The lid lifts off without damage, and both parts are delivered flat.
- Two parts: base and lift-off lid.
- No glue: walls secured with tabs.
- Delivered flat: saves storage space.
Custom FEFCO 0330
Give us the internal dimensions and tell us whether the lid should cover the box completely or partly.
Construction of the FEFCO 0330
The FEFCO 0330 is a telescope box made of two parts – a base tray and a slightly larger lid tray – but unlike the FEFCO 0301, neither part has to be glued. Each part is made from a flat blank. The walls are folded double and have tabs and locking tabs at the corners and edges that push into slots – so the walls lock themselves.
Both parts are delivered flat and folded by hand before packing.
Typical uses
- Gift boxes and sets – when the box should look like a classic box “with a lid” but take up little space before use.
- Clothing, documents, products that are opened often – the lid is lifted off and put back on without damaging the box.
- Smaller runs and storage with little space – no gluing, and flat blanks store well.
Strengths and limits
Strengths:
- No glue or tape – the walls are held by tabs.
- Flat until needed – both parts take up little space in storage and transit.
- Double walls – folded walls are stiffer than a single layer of board and give a straight, clean edge.
Limits:
- Folding by hand takes longer – than taking a ready-glued FEFCO 0301 box off the stack.
- Shaped blank – locking tabs and slots are cut with a cutting die or plotter, and the blank is larger because the walls are double.
- For light to medium-weight products – for high weights a set with glued corners is the better choice.
FEFCO 0330, 0301 or 0425?
| Model | Construction | When to choose |
|---|---|---|
| FEFCO 0330 | base and lid slot together, no glue | a box with a lid that should be delivered flat |
| FEFCO 0301 | base and lid with glued corners | ready to use straight away, heavier contents |
| FEFCO 0425 | one box with a hinged lid | when the lid should not be a separate part |
How to determine the dimensions
Give the internal dimensions of the base and say whether the lid should cover the box completely or only partly. Because the walls are double, the difference between internal and external dimensions is larger than on an ordinary box – this matters when the box has to fit into a drawer or an outer box, for example. More in the guide How to measure boxes correctly.
How to order FEFCO 0330
- Measure the product. Give the internal dimensions of the packaging: length × width × height in millimetres. Allow a few millimetres of clearance if the product should fit in loosely.
- State the weight and shipping method. The board depends on it – parcel shipping, pallets and storage each make different demands.
- Give the quantity. How many pieces do you need now, and how often do you order?
- Decide on printing. The packaging can be brown (kraft), white or printed.
Which corrugated board for FEFCO 0330?
| Corrugated board | Thickness (approx.) | Uses |
|---|---|---|
| Single-wall, B flute | 3 mm | lighter products, parcel shipping |
| Single-wall, C flute | 4 mm | medium-weight products, better cushioning |
| Double-wall, EB flute | 4,5 mm | heavier products, prints well |
| Double-wall, BC flute | 7 mm | heavy loads, pallet transport |
Not sure which board is right? Tell us the weight and shipping method – we will choose it for you.
Frequently asked questions
Does the FEFCO 0330 need to be glued?
No. Both parts are folded from flat blanks, and the walls lock with tabs in slots.
How does the FEFCO 0330 differ from the FEFCO 0301?
Both are boxes with a lift-off lid. On the FEFCO 0301 the corners are glued and the parts are ready to use straight away; on the FEFCO 0330 the parts arrive flat and are folded by hand without glue.
How do I fold the FEFCO 0330?
Raise the walls, fold their outer layer inwards and push the locking tabs into the slots in the bottom. The lid is folded the same way and then slid onto the base. The guide to folding mailer boxes shows a similar technique.